Operation
25
Do not disturb
Every extension can be programmed in such a way that the telephone will not ring
on incoming calls (do not disturb). This function can be activated at your
telephone by dialling the code number
. You can still place calls yourself.
With help of the PC configuration software you can grant or deny authorisation to
activate this function individually for each subscriber.
Activate 'do not disturb'
Pick up handset.
You will hear the internal calling signal
Dial
for 'do not disturb'.
You will hear a fast dialling signal as
acknowledge.
Hang up.
The telephone will no longer ring with
incoming calls (external calls, internal calls,
person calls, door bell calls). The caller will
here the calling signal.
Deactivate 'do not disturb'
Pick up handset.
You will hear the internal calling signal
Dial
to deactivate 'do not disturb'.
.
You will hear the standard dialling signal
again.
Hang up.
The telephone will now ring again when
somebody calls you.
Room monitoring
The telephone system provides you with the option to acoustically monitor a room,
i.e. the vicinity of an extension telephone. In order to be able to do this place this
telephone in the room you wish to monitor, pick up the handset and put it down
beside the telephone and dial the code number
. The handsets microphone
should point in the direction you wish to monitor. Now you can call this telephone
from every authorised extension and list to what happens in that room.
The 'room monitoring' function can only be carried out from an internal extension.
Example: Telephone 23 is in the nursery and shall be activated for monitoring. Telephone 21 shall be the
'receiver'.
