Configuration and settings
31
In addition to the functions you can configure via the programming telephone
you can configure the following features via the PC configuration:
•
Authorisation speed dial
•
Authorisation 'do not disturb'
•
Authorisation 'pick up'
•
Authorisation 'person call'
•
Authorisation 'room monitoring'
•
Call deflection external
•
Names for extensions
•
Priority of external lines
•
Authorisation forwarding external/external
•
Selection of ringing signals
•
Definition of call groups
•
Time control
•
Telephone book
•
Firmware update
•
External cal deflection
•
Connection monitoring
•
Pharmacy function
The programming telephone
The basic functions of the telephone system can be programmed without the
help of a PC via a telephone. The so called programming telephone has to be
used for this. Due to the fact that the programming is carried out by dialling
digits it is recommended to use a telephone with a display. So you can verify
the digits you entered and avoid typing errors. It can also be helpful to write
down the digit sequences for the settings you wish to programme. This makes
the input easier and will also provide you with some documentation on your
settings.
Telephone 21 at port 1 is the programming telephone with which the
configurations and settings we refer to in the following can be carried out. By
dialling the code number
you will get to the programming level and
by dialling additional digits you can carry out a variety of configurations.
