Configuration and settings
33
The telephone system has been designed for use with 2 external lines. In case
you are only using one external line it is strongly recommended to disable
access to the second external line which is not in use.
Activate/deactivate external line access
Example: Access to external line 1 for telephone 23 shall be deactivated.
1. Telephone 21:Pick up handset
You will hear the internal calling signal.
2. Dial code number
.
Programming level is on. You hear the
acknowledge signal
3. Dial code number
to
deactivate access to external line 1 for
telephone 23.
You hear the acknowledge signal. Telephone
23 has no longer access for outgoing calls to
external line 1. When dialling
for external
line access telephone 23 will get external line
2.
4. Hang up.
Programming is done.
Telephone
21 22 23 24 25 26 27 28 all
Ext. line access
Ext. line 1 on
211 212 213 214 215 216 217 218 210
Ext. line access
Ext. line 1 off
221 222 223 224 225 226 227 228 220
Ext. line access
Ext. line 2 on
231 232 233 234 235 236 237 238 230
Ext. line access
Ext. line 2 off
241 242 243 244 245 246 247 248 240
Setting external call signalling
Incoming external calls will be signalled in the programmed ringing rhythm.
This signalling can individually be activated or deactivated for every telephone.
Programming can be carried out via telephone 21 according to the table below.
In the factory default settings external call signalling is activated for both
external lines and for all telephones.