Configuration and settings
35
Activate call forwarding
1. Telephone 21: Pick up handset
You will hear the internal calling signal.
2. Dial code number
.
Activate the programming level. You hear the
acknowledge signal.
3. Dial code number
to activate the
call forwarding.
You hear the acknowledge signal.
Call forwarding has been activated. External
calls will be signalled at telephone 23 through
28 not before 15 seconds are over.
4. Hang up.
Programming is done.
Deactivate call forwarding
1. Telephone 21: Pick up handset
You will hear the internal calling signal.
2. Dial code number
.
Activate the programming level. You hear the
acknowledge signal
3. Dial code number
to deactivate
call forwarding.
You hear the acknowledge signal.
Call forwarding has been deactivated. External
calls will be signalled at all authorised
extensions simultaneously.
4. Hang up.
Programming is done.
Activate automatic external line access
When automatic external line access has been activated and the handset is
being picked up you will get an external line immediately. By pressing the
button you will return to internal.
Automatic external line access can be set up for every telephone individually.
Programming can be carried out via telephone 21 according to the table below.
In the factory default settings automatic external line access is deactivated for
all telephones.
Example: Automatic external line access shall be activated for telephone 24.
1. Telephone 21: Pick up handset
You will hear the internal calling signal.
