5
1. DESCRIPTION AND OPERATION
1.1.
General Information and Purpose.
1.1.1 Turnstile purpose:
The turnstile is designed for arrangement of individual pedestrian access at access points of
industrial enterprises, banks, stadiums, administrative facilities etc. driven by control signals of
access control system (from keypad, proximity card readers) or manually (from wire control
panel).
The turnstile traffic flow capacity without personal identification is at least 25 persons per
minute.
1.1.2 The turnstile dimensions and weight
correspond to the values specified in Table
2.
Table 2
Designation of
modification
Dimensions, mm
Pedestal size,
(LxW)mm
Maximum
weight, kg
Н
L
В
T3.TCC.XE.2
1000
793
1580
324х550
50*
T3.TCY.ХE.2
1000
793
1530
524х500
55*
T3.TYK.ХE.2
1000
1000
1520
1004х490
84*
1.1.3 The operation condition parameters
according to GOST 15150
-
69 are specified in
Table 3.
Table 3
Operation conditions
For climatic
modification
Parameter value
Ambient temperature
NF4
+1°С to +40°С
Relative humidity
80 % at 20 ºС
Ambient temperature allowable
pressure
84 to 106,7kPa
Transportation temperature range
-
40°С to + 50°С
Storage temperature range
+ 5°С to + 40°С
Group of mechanical application
L3
Altitude above sea level
up to 2000 m
Environment
Explosion
-
proof, does not contain
current
-
conducting dust, aggressive
gases and vapours in concentration
destroying isolation and metals,
disturbing normal operation of the
equipment installed in turnstiles
Installation site
In enclosed spaces in the absence of
direct impact of precipitations and
solar radiation
Operating position
Vertical, deviation from vertical
position no more than 1º to any side
is tolerated
