10
The single turnstile «JETPAN-1»
(See Fig.4)
consists of two one-leaf cabinets.
One-leaf cabinet body includes:
–
frame;
–
base;
–
set of side panels;
–
top lids;
–
retractable device with glass leaf;
–
glass partitions;
–
two LED displays.
Inside cabinet there are installed:
–
terminal block;
–
controller;
–
seven access sensors;
–
proximity identification card reader (to be equipped by the customer, if appropriate);
–
power supply unit.
The cabinet design provides a space for installation of proximity identification card reader.
Cabinet has built-in components:
− controllers;
− power supply unit.
Optionally cabinet can be completed with battery* (
4 А·h).
The single turnstile control
desk equipped with power supply unit, circuit breaker and battery* is installed only in the cabinet
(Master) from the protected area side.
1.3.3 Design of the «JETPAN-2» type turnstile (See Fig.5).
The turnstile is an additional cabinet «JETPAN-2» (Master/Slave) with two leaves (glass
panels). The number of additional cabinets is specified in order.
The turnstile «JETPAN-2» operates only as part
of the turnstile “JETPAN
-
1”. The additional
cabinet includes:
–
base;
–
set of side panels;
–
top lid;
–
two retractable devices with retractable glass leaves;
–
glass partition;
–
four LED displays.
Inside the additional cabinet body there are installed:
–
terminal blocks;
–
controllers;
–
fourteen access sensors;
–
two proximity identification card readers;
–
power supply unit.
Optionally additional cabinet can be completed with battery
*
.
