Page
-15-
Size А4
Installation and Operation Manual
Revision 1.0 2021
ROAD BLOCKING SYSTEMS
Office and Production site:
Tel.:
+380 (44) 291-21-11
14 Promyslova str., 02088, Kyiv, Ukraine,
Fax:
+380 (44) 291-21-02
E-mail:
sales@tiso.global www.tiso.global
BOOM BARRIER OPTIMUS
6.4.3 Arm position adjustment
At closing, the optimal position of the arm is parallel to the roadway, at opening - ~90°.
The barrier arm is correctly adjusted if arm takes an optimal position in relation to roadway and movement of
barrier mechanism lever is limited by stops.
The boom is correctly adjusted when it is sufficiently stable in the 0 ° and 90 ° positions.
For arm lowering or raising adjust the upper and lower position of the stops limiting the movement of arm:
Lower the barrier arm to the “
closed position
” using the manual control handle:
- To change the position of the top stop it is necessary to
loosen the nut and move into the slots.
- Lock the required position by tightening the nut.
Raise the arm to the "
open position
” using the manual control handle:
- To change the position of the lower stop it is necessary to
loosen the nut and move into the slots.
- Lock the required position by tightening the nut.