3 AUIA.123.00.00.00.00-05 OM
INTRODUCTION
This Operation Manual (hereinafter referred to as the OM), combined with datasheet, covers the servo-
operated waist-high rotor turnstile (hereinafter referred to as the turnstile). The Operation Manual
contains information about design, specifications, installation, proper operation and maintenance of the
turnstile.
This Operation Manual is prepared in compliance with the specification requirements ТU
U 31.6-32421280-004:2010.
The turnstile should be serviced only by the qualified staff having the relevant class of permit to work
with electrical facilities with voltage up to 1000V, who carefully studied this Operation Manual,
obtained safety instructions and trained for operation and maintenance of the turnstile.
Reliability and durability of the turnstile operation is provided with observation of modes and
conditions of transportation, storage, installation and operation. So, fulfillment of all requirements
specified in this document is mandatory.
In view of regularly performed works on improvement of the product, its design can be modified
without degradation of parameters and quality of the product.
Depending on the purpose and design features of the turnstile, the following pattern of product
reference designation is accepted:
T3. РКC. X C
waist-high turnstile
rotor with
glass blades
servo-operated turnstile
P
polished stainless steel
S
brushed stainless steel
Example of reference designation of servo-operated rotor turnstile with glass blades and housing from
brushed stainless steel when the turnstile
T3.РКC.SC ТU U 31.6-32421280-004:2010 is ordered.
