4 AUIA.123.00.00.00.00-05 OM
WARNINGS TO THE CUSTOMER
ON SAFE OPERATION OF THE TURNSTILE
These warnings are designed for ensuring of safety during operation of the turnstile to prevent
violation of safety characteristics by improper installation or operation. These warnings are aimed at
drawing attention of the customer to safety problems.
GENERAL WARNINGS
Safety measures and requirements specified in this in this OM must be observed:
the turnstile must be connected to ground loop prior to operation;
–
the turnstile should be connected to AC network with parameters specified in the paragraph 1.2
«Specifications»;
–
inspection, adjustment and repair should be performed only after the turnstile is deenergized.
After purchasing of the turnstile it should be unpacked and its integrity should be checked. In case of
doubt in integrity of the turnstile it should not be used and the customer should refer to the supplier or
to the manufacturer.
Packing accessories (wooden pallet, nails, clips, polyethylene bags, cardboard etc.) as potential sources
of hazard must be removed to unacceptable place prior to proper use of the turnstile.
As electric shock protection device the turnstile is related to 01 protection class according to the GOST
(State Standard) 12.2.007.0-75 and is not intended for operation in explosive and fire-hazardous areas
by the «Rules for design of electrical installations».
Using of the turnstile for unintended purpose, improper installation, nonobservance of conditions of
transportation, storage, installation and operation specified by this OM, may result in damage to
people, animals or property for which the manufacturer is not responsible.
