29/05/2020
27
User’s Manual for the T-Touch Connect Solar
In the “Time” sub-menu, you can adjust all the watch’s date and time settings, such as the date and
time display format, and the first day of the week.
Password
In the “Password” sub-menu, you can manage the watch’s password. When the password is
activated, the watch automatically locks itself when disconnected from the phone or if you press
simultaneously on the “START” and “BACK” push-pieces.
Sounds
In the “Sounds” sub-menu, you can adjust all the watch’s sound alerts.
Please note: Alarm and timer sounds remain active regardless of this setting.
Vibrations
In the “Vibrations” sub-menu, you can adjust all the watch’s vibration alerts.
Please note: Alarm and timer vibrations remain active regardless of this setting.
Units
In the “Units” sub-menu, you can adjust all the watch’s units.
Energy saving
The “Energy saving” sub-menu allows you to manage and obtain information about your watch’s
energy consumption.
Watch battery level
Please note: The battery level is represented by coloured bars. When the watch is fully charged, the
battery level is represented by 6 green bars. When the battery is nearly flat, the level is represented
by a single red battery.
Activation and deactivation of “Auto sleep” mode (Automatic sleep mode)
Please note: When this mode is activated, the watch automatically enters sleep mode when it has
not been worn for at least 2 hours. When the watch is in sleep mode, the hands are stopped and the
screen, backlighting and Bluetooth® are turned off to save energy.
You can enter this mode manually by selecting “Enter in sleep. »
Activation and deactivation of “Eco mode”
This mode increases battery life by reducing battery output. For example, the connection with your
phone is slower and vibration and backlighting are deactivated.
Restore to factory settings
You can restore the watch to its factory settings from this sub-menu.
Please note: If you opt to restore the factory settings, all data not yet synchronised with the Tissot
T-Connect mobile app will be lost. The connection with your phone will be deleted and you will have
to remove your watch from your phone’s connection settings if you wish to initiate the connection
procedure again.
