29/05/2020
29
User’s Manual for the T-Touch Connect Solar
7.
Timing
(Timing and Alarm)
To access the “Timing” (Timing and Alarm) functions:
Unlock the watch with a long press on START.
Press the “Timing” touch zone.
Pressing and turning will give you access to the following
functions:
Please note: You can go back at any time by using the BACK push-piece.
•
Chrono (Timing)
In “Chrono” mode, various types of timing are available in addition to basic timing, such as lap timing
and intermediate timing.
Activation of timing functions:
Give the “START” push-piece a short press to start the timer
Give the “BACK” push-piece a short press to enter an intermediate time (e.g. lap time or
arrival of first runner)
Give the “START” push-piece a short press to stop the timer (e.g. end of last lap or arrival of
last runner)
Give the “START” push-piece a short press to reset the timer to zero
To choose between Lap Timing and Intermediate Timing:
Select “Set mode” by pressing and turning . You will now have access to “Set mode”, enabling you
to choose between timing types, and “Logbook”, for the most recent times recorded.
o
Chrono Lap (Lap timing)
The Lap Timing function is a timer for measuring lap time for a single runner, vehicle, etc. Maximum
measurement limit: 99 days 23 hours 59 mins 59 secs.
o
Chrono Split (Intermediate timing)
