www.tissot.ch
124_EN / 08.06
2/4
Chronograph with alarm
Setting the time
Crown in position III
Pull the crown to position
III
; the small second hand (
6
) stops at this point.
Call up the display of Hours/Minutes (e.g. 20:58) by pressing down pusher
A
for < 1 second.
To choose how to display time in AM/PM (e.g. 11, 12, 1) or 24 hrs (e.g. 11, 12, 13) press pusher
D for < 1
second.
Correct position of hours and minute hands using the crown.
Correct the digital hours setting using pusher
C.
Correct the digital minute setting using pusher
B.
Notes :
– Make sure that the analog time always corresponds to the digital time.
– In order to perfectly synchronize analog and digital time settings, stop the second hand just when the it
reaches 60" (by pulling the crown into position
III
).
Displays
Digital watch indicator, left side
Crown in position I
• Display of alarm On/Off
• Display of alarm function AL
• Display of alarm hour
• Display of timing mode CH
• Display of timing functions
- ADD function display AD
- SPLIT function : display SL
- LAP function : display LP
Crown in position II
• Time TI
• Digital display of time accurately reflecting
changes in the time zone
Crown in position III
• Time TI
• Flashing of digital time display
• Flashing of month M
Digital watch indicator, right side
Crown in position I
• Display of date D
• Display AM/PM/24H of the alarm
• Display of alarm minutes
• Display of 1/100ths of a second in timing mode
Crown in position II
• Display AM/PM/24H of time
• Display of minutes of digital time
Crown in position III
• Display AM/PM/24H of time
• Flashing of minutes of digital time
• Flashing of day d
*
Congratulations
We would like to congratulate you on having chosen a chronograph TISSOT
®
, one of the most highly renowned Swiss brands in the world. Meticulously designed,
using only the highest quality materials and components, your chronograph is protected against shock loads, variations in temperature, water and dust.
When operating as a chronograph, this model is able to time events lasting up to 12 hours, displaying the results to the 1/100th of a second, and also provides
you with the following functions:
– Standard START–STOP function
– ADD function (partial times)
– SPLIT function (intermediate times)
– LAP function (time per lap)
Your chronograph also features an alarm function as well as a display showing month and date.
To ensure that your chronograph operates with perfect precision for many years to come, we advise you to pay very careful attention to the advice provided
hereafter.
Usage / Settings
Models with a screwed crown
You must first unscrew the crown into position
IB
before you can pull it out into position
II
or
III.
Important : After each operation, you must always screw the crown back down to ensure that your watch remains water-resistant.
Pushers
Press briefly on the pusher to move the hands in increments. If you press for more than 1 second, the hands will move continuously (rapid setting).
I II III
