Press
P1
to start the timer…
…then
P1
once again to stop it...
Then press
P1
to continue or
P3
to reset
the timer to its initial value.
Start
P1
Set
P3
Stop
P1
Continue
P1
Reset
P3
Select the "
Settings
" mode of the
"
Time
" channel.
Select the line corresponding to the
desired setting. Touch to enter into
setting mode.
Use and
to select the desired
value. Confirm with .
www.tissot.ch
14/19
119_E / 06-04
Your High-T
®
has a "
Timer
" function adjustable from 1
second to 23 hours, 59 minutes and 59 seconds.
To access the "
Timer
" mode, refer to the navigation
diagram in the "
Time
" channel described on page 10.
"Timer" mode
To activate or deactivate the "Timer":
While the timer is operating, you can without any
problem change mode (by a touch on ), for example
to set an alarm, or channel (by a second touch on ),
for example to look up stock prices, then return to the
chrono mode, etc.
On most watch faces showing the time, the icon
indicates that the timer is activated. This icon also
appears in the other channels, when the Time and
Date bar appears at the top of the screen.
When the end of timing signal is triggered, press
any push button to stop it.
"Settings" mode
You can perform a number of settings on your
High-T
®
. To do so, simply choose the "
Settings
" mode
in the "
Time
" channel and refer to the navigation
diagram in the "
Time
" channel described on page 10.
Choose the desired setting using
and
,
then confirm by touching . The selected setting is
indicated by a black bar (see below).
Next modify the selected value using
and
,
then confirm using .
Press
P3
to enter timer setting mode...
...then
P1
and
P3
to set the timing
period (in minutes), then press
P2
to
confirm, set the period in seconds and
then in hours...
...then finally confirm by pressing
P2
.
Set
P3
To set the "Timer" mode:
+
P1
–
P3
Confirm
P2
Confirm
P2
Summary of Contents for HIGH T
Page 1: ...USER S MANUAL ...
