*
12/12
SEA-TOUCH
www.tissot.ch
145_EN
Activate glass
Chrono
display
Start
chrono
Stop
chrono
Split (partial time)
Start
chrono
a) Flashing stop with partial
time displayed, and chrono
running in background
b) Restart the chrono
counting the elapsed time
Stop
chrono
Reset
chrono
Reset
CHRONO
Resolution: 1/100 sec / Measurement range: 99 hrs 59’59’’ and 99/100 sec
1 sec.
WARNINGS
Battery type: button-type lithium-manganese dioxide primary battery cell.
Your TISSOT SEA-TOUCH
is NOT
a scuba-diving watch and the measurements of the TISSOT SEA-TOUCH are not of a professional or industrial
precision.
Your TISSOT SEA-TOUCH
does NOT
replace a professional dive computer. You can use the TISSOT SEA-TOUCH as a back up instrument only.
Warning !
After each dive, please rinse and clean the watch thoroughly using only clear fresh water. Do not use any form of detergent.
The pressure gauge shows a diving depth of up to 59 m / 189 ft. Even if you dive deeper, the display will continue to show a diving depth of 59 m / 189 ft.
The maximum diving time that can be displayed and registered is 180 minutes / 3 hours.
For your security do not dive deeper as international diving standards recommended: i.e. 30 m / 100 ft.
