www.tissot.ch
153_EN
16/16
T-TOUCH SOLAR E81
The brightness of the digital display decreases when the hands are in motion.
In fast continuous setting mode, the display moves at a faster rate than in non-
continuous or normal speed setting mode. To exit fast continuous setting mode,
you need to release the push-buttons for 1 second to continue in normal speed
setting mode.
SENSOR FAULT
5 sec.
When a function is selected and the display is cleared, it is probably due to a
failure of the selected function's sensor.
Error:
the display is cleared
Back to time T1 display
If this happens, please contact your retailer.
WARNINGS
Battery type: ML2016 accumulator.
To activate the functions on your T-TOUCH SOLAR E81 a gentle press on the push-
T-TOUCH SOLAR E81 a gentle press on the push-
a gentle press on the push-
buttons or touch on the glass is all that is required. Excessive force may damage
the watch.
Do not expose the watch to places where high temperatures might be reached
(e.g. under a car windscreen in direct sunlight).
Watch operating range:
-5°C to +55°C / 23°F to 131°F
Additional information in the "International Warranty – Service centres" booklet
The T-TOUCH SOLAR E81 is water resistant to 10 bar (100 m / 330 ft) at 25°C /
T-TOUCH SOLAR E81 is water resistant to 10 bar (100 m / 330 ft) at 25°C /
is water resistant to 10 bar (100 m / 330 ft) at 25°C /
77°F, but it is not an instrument suitable for sports diving. You must not use push-
buttons when the watch is underwater. None of the functions can be activated if
the glass is in contact with a liquid.
