www.tissot.ch
153_EN
5/16
T-TOUCH SOLAR E81
TIMES T & T2 >
SETTING
Pressing and holding
or
will move the hands forward or backward. Time T2 is set in steps of 15 minutes.
Activate glass
Time
T
or
T2
display
(example: T)
Enter
hour setting mode
:
forward 1 hour
:
back 1 hour
(hands and display)
:
forward 1 minute
:
back 1 minute
(hands and display)
Validate the hour setting
and switch to
minute
setting
mode.
Validate the minute setting
and switch to
seconds
synchronisation
mode (T1).
Seconds synchronisation (T1).
1 sec.
2 sec.
a)
b)
or
or
or
or
or
a)
If the seconds are between
0
and
30
when
the push-button is pressed, the minute is
unchanged and the seconds restart at zero.
If the seconds are between
31
and
59
when
the push-button is pressed, the minute is
moved forward and the seconds restart at zero.
b)
The seconds continue.
BAT (BATTERY) >
READING THE CHARGE LEVEL
If the watch is in this mode, the battery charge state is indicated by the last 3 digits.
In this state, the watch can no longer
operate correctly.
All the functions are deactivated,
except for time T1 and the date.
The watch will enter energy saving
mode (see page 8).
The watch will need to be exposed to
light to obtain sufficient charge to run
normally.
Battery charge level
display
Normal operation
Battery at
1/3 charge
Battery
charged
Battery at
2/3 charge
Battery drained
Battery flat
The watch is stopped.
It automatically exits this state after
prolonged exposure to light.
The time and date must be reconfigured
when exiting this state
.
The light can no longer be activated.
"bAt" is displayed in alternation with the
regular function.
The watch must then be exposed to light
to exit this mode.
Recharge indicator
