www.tissot.ch
153_EN
7/16
T-TOUCH SOLAR E81
"SWAP n"
= No
"SWAP y"
= Yes
Mode
"SWAP y"
Validate setting
Times
T
and
T2
are swapped
SWAP (TIME SWAP) >
SETTING
SWAP mode is used to switch from time T to time T2 and vice versa. For example: before setting off, you can set under T2 the local time zone
for the country you are going to visit.
2 sec.
or
or
SWAP
mode display
The analogue display and the time
T
indicate
the time for the country you are visiting
Time
T2
indicates the time where you live
Setting
mode
Outward trip
Mode
"SWAP y"
SWAP (TIME SWAP) >
EXAMPLE OF A TRIP ABROAD
10:10: Local time where you live / 18:10: Local time for the country you are going to visit.
The analogue display and the time
T
indicate
the time where you live
Time
T2
indicates the time for the country
you are visiting
Return trip
SYNCHRO (SYNCHRONISATION) >
SETTING
The watch needs to be synchronised if the watch hands do not display the same time as the digital display,
or if they are not correctly superimposed when accessing the functions.
The watch is desynchronised when its electric motor’s mechanism is disturbed due to heavy impacts for
example.
N.B.: The glass must be active to access synchronisation mode.
Synchronisation
mode
display
Synchronisation
setting
mode
The hands should
be perfectly
superimposed in the
12 o'clock position
Position the minute
hand at 12 o'clock
Validate setting
Position the hour hand
at 12 o'clock
Validate setting Back
to
Time T
mode
or
or
or
✓
Synchronised
✗
Desynchronised
2 sec.
or
