4
1.6 DESCRIPTION
This lift is a 11,000 lbs. capacity, two-column lift. The safety system in this lift is attached
to the back of the carriage to provide a single point release that saves time when operating.
This lift is equipped with heavy-duty bearings and driven by two heavy-duty BL646 leaf
chains, one per side. The hydraulic cylinders used are greater than 3” in diameter, providing
40% more force than the traditional 2-1/2” diameter cylinders.
An electrical-hydraulic power unit included with the lift will provide up to 3000 Psi of
hydraulic pressure to actuate the cylinders.
Please read the Safety Procedures and operation instruction in this manual before
operating the lift.
Proper installation is very important. To minimize the chance of making an error in
installation, please read this manual thoroughly before beginning installation. Check with
building owner and/or architect’s building plans when applicable. The lift should be located
on a level floor with 6” 3000 psi concrete sufficiently cured for at least 30 days.
This is a vehicle lift installation / operation manual and no attempt is made or implied
herein to instruct the user in lifting methods particular to an individual application. Rather, the
contents of this manual are intended as a basis for operation and maintenance of the unit
as it stands alone or as it is intended and anticipated to be used in conjunction with other
equipment.
Proper application of the equipment described herein is limited to the parameter detailed
in the specifications and the uses set forth in the descriptive passages. Any other proposed
application of this equipment should be documented and submitted in writing to the factory
for examination. The user assumes full responsibility for any equipment damage or personal
injury that occurs as the result of alteration of the equipment described in this manual or any
subsequent damages.
