4
ASSEMBLY INSTRUCTIONS
STEP 2
–
INSTALLING THE WHOLE TIRE REST PLATFORM ONTO YOUR TRUCK BED
1.
Sit the Tire Rest Platform-Left (A) and Tire Rest Platform-Right (B) on each side of the truck
bed on top of the side wall and against the window of the cap. Insert Connecting Tube-Rear
(7) and Connecting Tube-Front (6) into the Tire Rest Frame-Left (1) and Tire Rest Frame-Right
(2). Adjust the distance between Tire Rest Platform-Left (A) and Sit the Tire Rest Platform-
Right (B), so that the left and right mounting brackets sit on top of the side walls of truck
bed. Using a hand drill and align the drill bit with the hole of the mounting bracket, and then
drill a 1/2” hole through the top of the side wall. 6 Repeat this until two holes on each side
are drilled.
2.
Fasten the Tire Rest Platform Assembly onto the truck bed using Hex Flange Full Thread Bolt
M12x50 (12) and Hex Flange Lock Nut M12 (13). Do not tighten until all 4 positions are
fastened.
3.
In some case whenever truck bed allows, drill a 3/16” hole through the Rear Mounting
Bracket on each side through steel parts of the rear side of truck bed and tighten the Tire
