5
Rest Platform Assembly by applying Hex Self Taping Screw ST6x40 (14) through the hole on
each rear side of the truck bed.
4.
Use hand drill to drill 1/4” holes through the Connecting Tube
-Front (6) and Connecting
Tube-Rear (7), and then fasten and the Connecting Tube-Front (6) and Connecting Tube-Rear
(7) to the Tire Rest Platform Assembly by using Hex Flange Bolt M6x40 (15) and Hex Flange
Lock Nut M6 (16). When all hardware is fastened, tighten all hardware.
STEP 3
–
INSTALLING ATV RAMP ONTO TIRE REST PLATFORM
1.
Insert Adjustable Foot Tube (19) to the ATV Ramp (18). Rest the ATV Ramps on each side of
the Tire Rest Platform Assembly.
2.
Adjust the Adjustable Foot Tube (19) so that they touch the floor of truck bed.
3.
Adjust the distance between the ATV Ramp (18) on both sides so that the center of the left
and right ATV wheels is centered at the ATV Ramp (18) on each side. Note that the distance
between the ATV Ramp (18) to the center of the Tire Rest Platform Assembly on left and
right sides should be the same for best performance and load capacity.
4.
Align the drill bit with center hole of the ATV Ramp (18), using a hand drill to drill a 7/16” hole
through the front side of Tire Rest Platform Assembly on each side. Then fasten the ATV
Ramp (18) and Tire Rest Platform Assembly together on both sides tightly.
5.
Fasten the Adjustable Foot Tube (19) to the ATV Ramp (18) using Hex Bolt M8x40 (20) and
Hex Lock Nut M8 (21).
