English
English
4
© Titan Tool Inc. All rights reserved.
General Description
This airless line striper is a precision power tool used to spray many
types of material for many types of applications including parking
lots, curbs, and athletic fields. Read and follow this instruction
manual carefully for proper operating instructions, maintenance, and
safety information.
ImPORTANT : In order to prevent spills, make sure the pail is
covered whenever the unit is moving.
Spray
lever
Outlet
fitting
Handle
adjustment
knob
PRIME/SPRAY
Knob
Engine
shutoff
switch
Engine
DirectLink
pressure control
knob
Return hose
Gun cable
Airless spray hose
Siphon tube
Gun
support bar
Airless spray gun
Gun riser
Sureflo™
valve
* Pail not included.
Operation
Fueling (gas engine)
Gasoline is extremely flammable and is explosive
under certain conditions.
• ALWAYS turn the engine off before refueling.
• Refuel in a well-ventilated area.
• Do not smoke or allow flames or sparks in the refueling area or
where gasoline is stored.
• Do not overfill the fuel tank. After refueling, make sure the
tank cap is closed properly and securely.
• Be careful not to spill fuel when refueling. Spilled fuel or fuel
vapor may ignite. If any fuel is spilled, make sure the area is
dry before starting the engine.
• Avoid repeated or prolonged contact with skin or breathing of
vapor.
• Keep out of the reach of children.
Fuel Specifications
• Use automotive gasoline that has a pump octane number of
86 or higher, or that has a research octane number of 91 or
higher. Use of a lower octane gasoline can cause persistent
“pinging” or heavy “spark knock” (a metallic rapping noise)
which, if severe, can lead to engine damage.
NOTE: If “spark knock” or “pinging” occurs at a steady
engine speed under normal load, change brands of
gasoline. If spark knock or pinging persists, consult
an authorized dealer of the engine manufacturer.
Failure to do so is considered misuse, and damage
caused by misuse is not covered by the engine
manufacturer’s limited warranty.
Occasionally you may experience light spark knock
while operating under heavy loads. This is no
cause for concern, it simply means your engine is
operating efficiently.
• Unleaded fuel produces fewer engine and spark plug deposits
and extends the life of the exhaust system components.
• Never use stale or contaminated gasoline or an oil/gasoline
mixture. Avoid getting dirt, dust, or water in the fuel tank.
Gasolines containing Alcohol
If you decide to use a gasoline containing alcohol (gasohol), be
sure its octane rating is at least as high as that recommended by
the engine manufacturer. There are two types of “gasohol”: one
containing ethanol, and the other containing methanol. Do not use
gasohol that contains more than 10% ethanol. Do not use gasoline
containing methanol (methyl or wood alcohol) that does not also
contain co-solvents and corrosion inhibitors for methanol. Never
use gasoline containing more than 5% methanol, even if it has co-
solvents and corrosion inhibitors.
NOTE: Fuel system damage or engine performance
problems resulting from the use of fuels that
contain alcohol is not covered under the warranty.
The engine manufacturer cannot endorse the use of
fuels containing methanol since evidence of their
suitability is incomplete at this time.
Before buying gasoline from an unfamiliar station,
try to find out if the gasoline contains alcohol. If it
does, confirm the type and percentage of alcohol
used. If you notice any undesirable operating
characteristics while using a gasoline that contains
alcohol, or one that you think contains alcohol,
switch to a gasoline that you know does not contain
alcohol.
