13
The manure spreader has an adjustment plate which changes the discharge hole sizes in the
discharge plate. Adjust the size of the discharge holes by loosening the threaded knobs on the
adjustment plate and sliding the plate to the desired opening.
MAINTENANCE AND STORAGE
WARNING
Improper maintenance and storage of the manure spreader may void the warranty.
MAINTENANCE
•
After each use, carefully clean material out of the hopper.
•
Rinse and dry the inside and outside of the manure spreader after each use.
•
Prior to each use, inspect and verify that all hardware is tight.
•
Before initial use, add grease to the two grease zerks on each side of the wheels.
•
Check and periodically add grease to the wheels.
•
After every use, spray out the hopper and the spreading drum. Cleaning the spreader will keep
debris and manure from clogging the spreading drum and damaging the spreader.
•
Check the rubber guard after every use and replace as needed.
IMPORTANT:
When replacing parts be sure to only use parts that meet the manufacturer’s specifications.
Replacement parts that do not meet the manufacturer’s specifications may result in safety
hazards and/ or poor machine operation and may void the warranty.
Summary of Contents for 191396
Page 15: ...15 PARTS DRAWING AND PARTS LIST...
Page 16: ...16...
