3515 Flex-Wing Rotary Cutter
36
Titan Implement, LLC
February 2020
(423) 334-0012
6.5 Initial Setup Checklist
Efficient and safe operation of the rotary cutter requires
that every user read and understand the operational
instructions and all related safety instructions outlined
in this manual.
This checklist is provided for the user/owner. It is
important for both personal safety and to maintain
the mechanical condition of the rotary cutter that this
checklist is followed.
Initial Setup Checklist
(prior to using for the first time)
4
Location
Task
Verify all safety signs are in
place and legible. Refer to
“3.3 Safety Sign Locations”
on page 19.
Make sure the rotary cutter
is properly attached to the
drawbar. Refer to “6.3
Attaching to Tractor” on page
33.
Make sure the driveline
is attached to the tractor
PTO, and safety chains
are installed. Refer to “6.3
Attaching to Tractor” on page
33.
Make sure all hardware
is properly installed and
tightened. Refer to “9.11 Bolt
Torque Requirements” on
page 50.
Check that the blades are
sharp. Refer to “9.6 Blade
Servicing” on page 47.
Make sure the blade carrier
nuts are tight and the cotter
pins installed. Refer to “9.7
Blade Carrier Removal” on
page 48.
Initial Setup Checklist
(prior to using for the first time)
4
Location
Task
Lubricate all grease zerks and
driveline slip joints. Refer to
“9.3 Greasing” on page 46.
Make sure all safety shields
and guards are properly
installed. Refer to “5.2
Assembly Procedure” on
page 24.
Check the gearbox grease
level. Refer to “9.4 Gearbox
Lubrication” on page 47.
Check the tailwheels for
damage. Make sure the
tailwheel support bolts are
tight.
Check the cutting height.
Adjust if needed. Refer to
“6.4.2 Setting the Cutting
Height” on page 35.
Summary of Contents for 3515
