25
In
more
detail...
GB
IE
Product functions
Intended use
This product is intended for sanding the following materials: wood, plastic, metal,
fillers as well as varnished surfaces. This product should not be used on other
materials or those harmful to health. It is to be used for dry operation only without
water or other cooling liquids.
For safety reasons it is essential to read the entire instruction manual before first
operation and to observe all the instructions therein.
Speed dial
WARNING!
Always switch the product off and disconnect it from power
supply before making any adjustments!
> Limit the maximum speed using the speed dial (8).
> Turn the speed dial (8) left (as seen from the operator’s position) to increase
the maximum speed (Fig. 13). A higher setting is suitable for sanding with fine
grained sanding belts to achieve a fine finishin
> Turn the speed dial (8) right (as seen from the operator’s position) to decrease
the maximum speed (Fig. 14). A lower setting is suitable for sanding with
coarse-grained sanding belts to remove paints and varnishes.
8
8
Fig. 13
Fig. 14
TTB910SDR
by TITAN
