Titan Advantage Series GPX33, Owner'S Manual

English

5 

Proper use 

and functions

Start

Controls and Functions

Sprays a variety of paints (oil-based and 

latex), primers, stains, preservatives and other 

nonabrasive materials.

Do not use. . . 

This pump should not be used with textured 

materials, block filler, asphalt sealer or 

materials containing HHC. See coating supplier 

if flash point is not listed on the container

Safety features:

Spray gun trigger lock and pressure diffuser; 

built-in tip safety guard; PRIME/SPRAY knob 

for safe pressure release. 

Specifications:

Power .................................Ruitao 37.7 cc 

engine, 1.6 Hp

Gas capacity .......................0.65 l 

(approximately 1 

hour spraying time)

Oil capacity .........................0.08 l

Maximum pressure .............3000 PSI

Flow rate .............................

0.33 gal/min (1.25 l)

Max tip size.........................0.017”

Capability:

PRIME/SPRAY knob:

The PRIME/SPRAY knob directs 

material to the material return 

tube when set to PRIME or to 

spray hose when set to SPRAY.

DirectLink™:

Spraying pressure is determined 

by the motor throttle.  The throttle 

is regulated by adjusting the 

DirectLink™ pressure control 

knob.  The higher the throttle, the 

higher the spraying pressure.   

TR

2

 spray tip:

The TR

2

 spray tip can be 

adjusted based on your spraying 

needs.

Trigger lock:

Engage the trigger lock whenever 

the gun is not in use.  

LX-50 - 

The gun is locked 

when the trigger lock is at a 

90º angle (perpendicular to the 

trigger in either direction).

Suction tube (a):

The suction tube draws the fluid 

from the original container into 

the pump.

Material return tube (b):

Fluid is sent out through the 

return tube and back into the 

original container when the 

PRIME/SPRAY knob is in the 

PRIME position.

Spray hose:

The spray hose connects the 

spray gun to the pump.

Spray gun:

The spray gun controls the 

delivery of the material being 

pumped.

AutoOiler:

The AutoOiler is designed to 

provide lubrication to the fluid 

section of the pump.  

Sureflo Valve:

The Sureflo Valve is designed 

to keep the inlet valve open and 

from sticking to dried materials.  

The Sureflo Valve is activated 

manually by the user.

Collapsible handle:

The cart handle can be collapsed 

for easier storage.  

Turn the cart knobs counter-

clockwise to unlock the handle.

Turn the cart knobs clockwise to 

lock the handle into place.  

Burn hazard.  When collapsed, 

the cart handle is very close to 

the exhaust port of the engine, 

which can be very hot after 

use.  It is recommended that 

the cart handle NOT be 

collapsed until after the engine 

has cooled.

(a)

(b)

SPRAY

PR

IM

E

LX-50

WIDE

NARROW