30
PowrPlast 600
GB
table of contents
1
SAFety ReGuLAtIONS ______________________ 31
2
INtRODuctION tO WORkING WItH tHe
MORtAR SPRAyING MAcHINe POWRPLASt 600 33
2.1 Function of the
mortar spraying machine
PowrPlast 600 _______________________________ 33
2.2 Processible coating materials ___________________ 33
3
tecHNIcAL DAtA ___________________________ 33
4
exPLANAtORy DIAGRAM FOR POWRPLASt 600 34
4.1
Operating elements and displays on device
_______ 35
4.2 Drive _______________________________________ 36
4.3 Compressor (accessory)
_______________________ 36
4.4 Mortar hose for pneumatic spray lance
___________ 36
4.5
Mortar hose for automatic spray lance
___________ 36
4.6
Spray lance
_________________________________ 37
5
tRANSPORtAtION __________________________ 38
5.1 Moving _____________________________________ 38
5.2 Transportation in vehicle ______________________ 38
6
cOMMISSIONING ___________________________ 39
6.1 Installation location ___________________________ 39
6.1.1
Connection to mains power supply/ Extension cable
39
6.2 Initial starting-up _____________________________ 39
6.2.1
Scope of supply
______________________________ 39
6.2.2
Assembly
___________________________________ 39
6.3 Connecting the mortar hose ___________________ 40
6.3.1
Automatic spray lance
_________________________ 40
6.3.2
Pneumatic spray lance
________________________ 40
6
.4 Compressor (accessory)
_______________________ 40
6
.5 Spray attachment assembly (accessories)
_________ 40
6
.6 Connecting the spray lance
____________________ 41
6.7 Remote control (
accessory
) ____________________ 41
6.7.1 Remote control
assembly
______________________ 41
6.8 Preparing the
mortar spraying machine
__________ 42
6.8.1
Rinse the mortar tube (Automatic spray lance)
____ 42
6.8.2
Rinse the mortar tube (Pneumatic spray lance)
____ 43
6
.9 Beginning of the spraying process
_______________ 43
6
.10 End of the spraying process
____________________ 43
7
GeNeRAL INFORMAtION ABOut tHe
APPLIcAtION tecHNIQue ___________________ 44
7
.1 Spraying technique
___________________________ 44
8
SHuttING DOWN AND cLeANING ____________ 44
8.1 Cleaning the mortar hose ______________________ 44
8.2 Cleaning the device and replacing the stator ______ 44
8
.3 Cleaning the spray lance
_______________________ 46
9
MAINteNANce _____________________________ 46
9.1 Mechanical maintenance ______________________ 46
9.2 Electrical maintenance ________________________ 46
9.3 Long periods of non-usage _____________________ 46
9.4 Rotor replacement ___________________________ 46
10 eLIMINAtING FAuLtS ________________________ 47
11 SPARe PARtS LISt FOR POWRPLASt 600 _______ 50
12 SPARe PARtS LISt OF cARRIAGe ______________ 51
13 SPARe PARtS LISt OF SPRAy LANce __________ 52
14 POWRPLASt 600 AcceSSORIeS _______________ 53
Testing of the
mortar spraying machine
_______________ 55
Note on disposal __________________________________ 55
Important information on product liability
_____________ 55
Guarantee declaration _____________________________ 55
CE declaration of conformity
_______________________ 110
Service network _________________________________ 112
table of contents