SPEED
9
12
NAME AND FUNCTION OF EACH PART
NAME AND FUNCTION OF EACH PART
7. Indicator of heating unit for the upper part of body
8. Indicator of seat cushion vibration
9. Dynamic indication of airbag massaging position for lower body
10. Indication of back massage point, massage unit position and massage
mode for upper body
11. Speed indication of back massage unit:
There is a 5-step shift mode for speed selection.
12. Width indication of back massage unit:
13. Air force strength indication:
There is a 5-step shift mode for air force strength selection.
14. Vibration intensity indication:
There is a 5-step shift mode for vibration intensity selection.
15. Memory function indication:
It will show when the memory function is started up.
It will show when the memory function is completed.
16. Body shape sensing indication
PREPARATION BEFORE USE
PREPARATION BEFORE USE
Step 2:
Raise up the backrest of massage chair at about 115
then it will be
locked when a sound Ka is heard. After that, take out the armrests,
align them with holes and fasten them with special screws.
Step 3:
Firstly take out the screw from the legrest connecting ring and connect
the legrest connecting inner bushing to legrest connecting outer bush,
next put them onto legrest revolving shaft, then put legrest components
into the legrest connecting ring and fasten it with screw, finally turn up
the legrest and insert the plug-in unit into the jack.
Step 4:
Put the seat cushion onto shelf, connect the airbag tube, and insert the
plug of vibrating motor into its socket as shown on the picture below.
Airbag tube
Plug of motor
WIDTH
AIR FORCE
VIBRATION
MEMORY SET
MEMORY
OK
BODY SHAPE SENSING
