29
TTB546BTS
by TITAN
Care and maintenance
In
more
detail…
GB
IE
Fig. 36
Fig. 37
> Remove the circular sanding disc to gain access to the allen bolt that secures
the aluminium sanding plate.
> Remove the allen bolt (36) and washer with 4mm hex key (Fig. 38), followed by
the bolt cup (37) (Fig. 39), you can then see the wooddruff key (38) (Fig. 40).
When refitting the disc plate you must align the groove in the disc with
the wooddruff key (38).
> When the disc has been removed, undo the lower cover screw (39) (Fig. 41)
and the upper cover screw (40) (Fig. 42), remove the disc belt cover.
Replacing drive belt
36
Fig. 38
Fig. 39
Fig. 40
37
38
21
3
