24
TTB903TCH
by
TITAN
Product functions
In
more
detail…
WARNING:
The disc will continue to rotate for a few seconds after
the machine has been switched off. Wait for the disc to stop before
removing the workpiece, or making any adjustments.
WARNING: Risk of injury!
Always pull out the mains plug in case of power failure (disconnect
the product from its power supply).
On/Off Switch
Switching on:
> The product can be switched on by pressing the green I-Button on the On/Off
Switch (7).
> Wait until the cutting disc has reached its maximum speed before commencing
work.
Switching off:
> The product can be switched off by pressing the red 0-Button on the On/Off Switch
(7).
Stop the machine immediately if there is undue vibration or some other fault. If this
situation continues, check the machine to find the origin of the fault.
Intended use
This tile cutter shall be used only to cut tiles to a required size or shape. It shall
not be used to cut inflammable, explosive or toxic materials. This product should
not be used on other materials or those harmful to health.
Other uses for the machine will lead to the damage of the machine and a series
of dangers to the operator. This appliance is for private and household use, not
for professional or industrial ones. Only identical accessories as the ones provided
with the tile cutter are authorised. Never use the appliance in the rain or other
wet conditions.
For safety reasons it is essential to read the entire instruction manual before first
operation and to observe all the instructions therein.
EN
Summary of Contents for TTB903TCH
Page 39: ......
