3 Press the button of which the captured func-
tion shall be deleted, e.g.
3
, briefly. The LED
will flash once and the learnt button function
is deleted.
4 Press and release
LEARN
button for exit of
deletion mode.
Reset/deletion of all learnt button functions
for a device
1 Press
SELECT
button to select device, of
which all learnt button codes shall be deleted,
as often until requested device LED e.g.
TV
is on.
2 Press
LEARN
button and then
3
button simul-
taneously until device lamp (LED) goes out.
Then release buttons. LED will flash twice. All
learnt button functions of selected device will
be deleted.
Assigning volume and mute button exclus-
ively to one appliance (punch through)
1 Press (power) button and then
button simultaneously until device lamp (LED)
lights constantly.
2 Press
SELECT
button to select the device,
which always shall be used for volume con-
trol, as often until requested device LED, e.g.
TV
, is on.
3 Press
OK
(or ) button
Disable volume and mute button punch
through function
1 Press (power) button and then
VOLUME-
button simultaneously until device lamp (LED)
lights constantly.
2 Press
0
button and punch through will be dis-
abled
Program Macros (Home Cinema Applica-
tion)
(UR 2400 only)
You can program up to 5 sequences, called
macros, of up to 16 control commands each to
be output on pressing on one single button.
1 Press
LEARN
button and then (power)
button simultaneously until a device lamp
(LED) lights constantly.
2 Press
SELECT
button to select the device
mode on which you like to set a macro button,
e.g. until
TV
LED is on.
3 Press any button except
LEARN
and
SE-
LECT
, e.g.
RED,
which you like to operate a
macro sequence. LED flashes twice and then
stays on.
4 Program the macro sequence, e.g. "All
Devices Off", by pressing buttons
SELECT
TV,
(power),
SELECT SAT/DVB,
(power),
SELECT BLURAY/DVD,
(power),
SELECT HTS/AMP,
(power).
- When memory is full LED flashes twice and
macro input is terminated.
5 Press
LEARN
button to save macro and ter-
minate input mode.
6 Test macro by pressing the selected macro
button, e.g.
RED
. Then all devices shall be
switched off one after another.
Vivanco GmbH, D-22926 Ahrensburg, E-Mail:
hotline@vivanco.de
, Helpline: +49 (0) 4102 231135
5