TITAN Technologies International, Inc.
®
9001 Jameel Street, Suite 180 • Houston, TX 77040
Toll-Free: 866.345.8484 • Phone: 281.449.9994 • Fax: 281.449.9996 • Email:sales@titanti.com
http://www.titanti.com
Before starting
These operating instructions is designed to give you some information about the
handling and safe application of the
TITAN
®
WindMaster
™ Hydraulic Tensioner
Pump.
Please read these operating instructions carefully to ensure the optimum function
and a high degree of safety.
The equipment is delivered fully assembled, functionally tested, vented and filled with
hydraulic oil. To prevent the oil from spilling during transport, the filling and venting
opening (depending on the model) is sealed with a plug.
Please ensure that it is replaced by the venting screw before commissioning (see
appendix).
SAFETY HINTS: WE STRONGLY RECOMMEND THE INSTALLATION OF A
GAUGE ON THE PUMP OR ON THE CYLINDER TO AVOID DAMAGE TO THE
COMPONENTS. PROPER PRESSURE CONTROL IS CRITICAL TO THE TASK AT
HAND AND TO SAFETY IN EVERY STEP OF THE WORK (Fig. 1).
Fig. 1
