TitanTec TT-BV3405, Manual

  



        

       

  



    

      

       

       

      

 

        

    







 

      

    

    



  

        

      

 

   Rib

(up-right)

Clamp Bolt

( upper )

Clamp Bolt

( Lower )

Blower Outlet

the blower outlet clamp bolt (upper).

 6.  Secure the elbow tube by turning the bolts 

     clockwise. 

Knob

    knob loosed completely.

2.  Pulling up the vacuum inlet cover with your hand.

4.  Align the switch on the inside of the vacuum

inlet with the slot on the upper vacuum tube.

side switch

slot

rib( up-right )

5.   Push the upper vacuum tube into the vac-

      uum inlet. Turn the tube counterclockwise 

      to secure the tube to the blower unit.

6.  Align the rib on the lower blower tube 
     with the rib on the upper blower tube. Sli-

de the lower vacuum tube on to the upper 
vacuum tube. 

assemble the two tubes together with 
the supplied screws.

1.  Remove the elbow tube and vacuum bag 

Clamp Bolt

(upper)

rib(up-right)

slot

side switch 

Clamp Bolt

(Lower)

Blower Outlet

Knob

Vacuum Inlet

Vacuum

Inlet

Cover

Rib

(up-right)

      Knob loosed completely. 

2.  Pulling up the vacuum inlet cover with your

     hand.

3.  Hold the vacuum inlet cover open until up-

     per vacuum tube is installed. 

5.  Push the upper vacuum tube into the vacu-

     secure the tube to the blower unit.

6.  Align the rib on the lower blower tube with

     the rib on the upper blower tube. Slide the 

     lower vacuum tube on to the upper vacuum

     tube.

     ssemble the two tubes together with the s-

     upplied screws.

4.  Align the switch on the inside of the vacuum

     inlet with the slot on the upper vauum tube.

anticlockwise

 1.  Turning the knob 

 till the

     um inlet. Turn the tube 

 to

anticlockwise

   by turning the bolts 

 to lo

anticlockwise

osen 

the elbow tube.

7.  When  vacuum tubes are fitted together a-