2. Mount the trimmer head (8) on the axle. Fasten tightly anti-clockwise.
NOTE (06)
Before using the trimmer head, mount the trimmer knife (E) to protection shield (F) with 3 screws.
When the machines is running, tap the trimmer head on the ground, and trimmer line will come out
automatically. The trimmer knife will cut and keep the trimmer line in the correct length.
■
HARNESS
WARNING
•
ALWAYS WEAR THE PROVIDED HARNESS WHEN USING THE MACHINE!
•
Always make sure the machine is hooked securely to the harness. If you don't, you will be unable
to control the machine safely. This can result in injury to yourself or others.
•
Never use a harness with a defective quick release or any other damage.
HOW TO WEAR
1. Wear the provided harness without twisted bands, with the hanger (1) on your right side.
■
BALANCE THE UNIT
1. Hook your machine to the hanger.
2. Adjust the bands of the harness to have the blade parallel to the ground when standing in your
normal working position to provide you most effectiveness and comfort on operating the machine.
3. In order to prevent the hanger position to change during operation, turn up the extra part of the
band from the buckle.
4. When correctly adjusted, check the correct working of the harnesses' QUICK RELEASE.
Mixing ratios:
When using commercially available 2-cycle oil (FB grade):
25
: 1
7
.
Fuel
------------------------------------------------------------------------------------------------------
Summary of Contents for XT-BC508-1
Page 1: ...XT BC508 1 ...
