• Make sure to use harness and cutting attachment guard. If not, it is very dangerous since you slip or
lose your balance.
■
CUTTING METHOD
(a)
Use the front left side cutting.
(b)
Guide the blade from your right to left with it tilted slightly to your left.
(c)
When mowing a wide area, start working from your left end to avoid interference of cut grass.
(d)
The blade may be seized by weeds if the engine speed is too low, or the blade cuts too deep into
weeds. Adjust the engine speed and cutting depth according to the condition of object.
WARNING
• If the grass or other object gets caught in the blade, or if the unit starts to shake or vibrate, turn off
the engine and check the whole unit. Change the blade if it has been damaged.
9.
Maintenance
-----------------------------------------------------------------------------------------------------
Always provide maintenance of the tool before storage. Maintenance must be regularly provided. Lack
of maintenance or improper maintenance will reduce the lifetime of the tool, and can provide bad
operation result and potential accidents and injuries.
After each operation, inspect the tool; check for loose fasteners, fuel leaks and damaged parts, such as
cracks in the cutting attachment. In case of any default, do not use the tool and bring to a qualified
service agent for inspection and reparation.
WARNING
•
Always be sure to stop the engine before inspecting the brush cutter for problems or performing
maintenance.
•
Never alter the brush cutter or take the engine apart.
Always clean and grind the blade, check whether the blade is firmly installed before use, and check
whether the blade is damaged if it encounters obstacles. If it is not used for a long time, clean the blade
surface and apply lubricant to avoid rust.
Summary of Contents for XT-BC508-1
Page 1: ...XT BC508 1 ...
