•
Pay attention to loosening and overheating of parts. If there is any abnormality of the machine,
stop operation immediately and check the machine carefully. If necessary, have the machine serviced by
an authorized dealer. Never continue to operate a machine which may be malfunctioning.
•
In start-up or during operation of the engine, never touch hot parts such as the muffler, the high
voltage wire or the spark plug.
•
After the engine has stopped, the muffler is still hot. Never place the machine in any places where
there are flammable materials (dry grass, etc.), combustible gasses or combustible liquids.
•
Pay special attention to operation in the rain or just after the rain as the ground may be slippery.
•
If you slip or fall to the ground or into a hole, release the throttle lever immediately.
•
Be careful not to drop the machine or hit it against obstacles.
•
Before proceeding to adjust or repair the machine, be sure to stop the engine and detach the spark
plug.
•
When the machine is placed in storage for a long time, drain fuel from the fuel tank and carburetor,
clean the parts, move the machine to a safe place and confirm that the engine is cooled down.
•
Make periodic inspections to assure safe and efficient operation. For a thorough inspection of your
machine, please contact a dealer.
•
Keep the machine away from fire or sparks.
•
It is believed that a condition called Raynaud’s phenomenon, which affects the fingers of certain
individuals, may be brought about by exposure to vibration and cold. Loss of color and numbness in the
fingers. The following precautions are strongly recommended because the minimum exposure which
might trigger the ailment is unknown.
•
Keep your body warm, especially the head, neck, feet, ankles, hands and wrists.
•
Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks
and also by not smoking.
•
Limit the hours of operation. Try to fill each day with jobs where operating the brush cutter or
other hand-held power equipment is not required.
•
If you experience discomfort, redness and swelling of the fingers followed by whitening and loss of
feeling, consult your physician before further exposing yourself to cold and vibration.
•
Always wear ear protection, loud noise for long time can make hearing debase even lost hearing.
•
Total face and head protection must be wearing to prevent damage from plummet or branch.
•
Wear no-slip heavy duty work gloves to improve your grip on the brush cutter handle. Gloves also
reduce the transmission of machine vibration to your hands.
•
WARNING: The cutter area is still dangerous while the machine is coasting to a stop.
•
When transport, this unit must be handled carefully. Do not expose yourself or others to danger.
•
Envelop the blade before storage. Keep children away from it.
•
Never remove the machine’s guard.
•
Never place the machine in any places where there are flammable materials (dry grass, etc.),
combustible gasses or combustible liquids.
•
When the machine is placed in storage for a long time, drain fuel from the fuel tank and carburetor,
clean the parts, move the machine to a safe place and confirm that the engine is cooled down.
•
Warning – the tool emits dangerous exhaust gases. Do inhale them and stay away from these
gases.
•
National regulation can restrict the use of the machine.
•
Never modify a trimmer or cutter in any way.
•
Improper use of the machine can cause SERIOUS OR FATAL PERSONAL INJURY.
•
The engine exhaust form this product contains chemicals to cause cancer, birth defects, of other
reproductive harm.
•
Checking regularly that the cutting attachment stops turning when the engine idles.
•
Use recommended cutting attachments and appropriate. Contact your dealer or our service agent
to know which cutting attachment can be used with this tool. There are possible safety consequences
from using other cutting attachments, e.g. metal multi-piece pivoting chains and flail blades.
Summary of Contents for XT-BC508-1
Page 1: ...XT BC508 1 ...
