b)
Using AA batteries
z
When no other power source is available, you may choose to use AA batteries.
z
Remove the battery cover at the rear of the DS by pulling the battery compartment tab
toward you.
z
Install 8AA regular batteries in the rear of the docking station making sure the battery
ter/- match the +/- signs on the bottom of the docking stations to ensure correct
electrical polarity.
z
Attach the included power cable to the AA Battery Out on the DS
③
and to the AA Battery
In on the Hi-Rez
7
TV.
z
Turn the TV on and refer to the operating procedures in the TV’s users’ manual.
3.
Use the DS to charge the Li-Ion batteries
Note: Please remove the AA batteries from the unit. The Li-Ion batteries will not charge if AA
batteries are inserted in the unit.
1) Installing the Li-Ion batteries (in the docking station)
z
Remove the battery cover from the bottom of the docking station.
z
Remove A. and B Li-ion batteries from the portable TV.
z
Insert A and B Li-ion batteries in the opening at the bottom of the docking station making sure the
battery ter/- match the +/- signs on the battery cover to ensure correct electrical polarity.
Please note the batteries are different in size and will only fit in appropriate charging
compartment.
z
Place battery cover back by pressing down and pushing into the slot.
z
Connect power adapter to docking station and to the power supply.
Note: If the Li-ion battery is not placed correctly in the docking station, the LED light will be
flashing red.
z
LED light will turn red (no flashing) during the time batteries are being charged.
z
LED light will turn green when batteries are fully charged.
Note: Unplug the power adapter if the machine is not being used.
www.tivax.com
