5
-
Close all files in the card,
-
Touch the menu icon and select
Setting
→
SD card & device storage
→
SD 1
→
Unmount SD1
.
-
The system will show “
Memory device safe to remove
".
-
Press the card and the card will pop out.
-
Take it out and the upper left screen will show "
Removed memory device
”.
Notice:
1. The card insertion has to be proper or the card will be damaged;
2. Don’t forcibly unplug the memory card without the message “Memory device safe to remov
e
”,
or it might damage the card;
3. If the card is write-protected, it wouldn’t be formatted or written before canceling
write-protection.
4. Mainstream memory cards are advised to avoid compatibility.
2.3
Hot Plug of Memory Card and External Flash Disk
Don't hot plug when you are using or browsing the files in the memory card or in the external
flash disk.
For example
, you’re browsing My Video, My Video or My Photo Album or using files in the
memory card or in the external flash disk, directly unplugging the memory card or external flash
disk may damage the card and the flash disk and the equipment may terminal the application for
self protection.
**
For hot plug of the memory card, please refer to 2.2 Memory Card. Close all files in the
flash card before unplugging the external flash disk
.**
2.4
Storage Space
There are 3 storage space areas: Device internal memory, External memory card and External
flash disk.
Equipment Internal Memory
,
-
Equipment Internal Memory will not be shown;
External Memory Card
-
The folder names of
SD
(TF card, Micro SD card)are
SD 1
and
SD 2
;
External Flash Disk
-
The folder names of the
U Disk
are
U Disk 1
and
U Disk 2
.
After flash disk or Memory Card connected, you can copy files between the flash disk, the
equipment and the memory card.
**
For copy method, please refer to 7.3 Document Browser**
The system storage area is only for system file storage; the entire equipment internal space is
Summary of Contents for MiTraveler
Page 1: ...User Manual Product Model MiTraveler10R...
Page 4: ...3 1 Appearance Description...
Page 21: ...20 Connect to 3G Network...