TiVo-Pace XG1 DVR Operations Guide • TiVo
®
Proprietary and Confidential
3
TiVo-Pace XG1 DVR Operations
Guide
This Operations Guide for the TiVo-Pace XG1 DVR contains the following sections:
Introduction
(see the next section)
DVR specifications
on page 7
Software features
on page 10
Guided Setup
on page 12
Introduction
This guide describes the operational aspects of the TiVo-Pace XG1 DVR (see
Figure 1
), including the
hardware specifications, main software features of the TiVo v2.4 software, and a tour of Guided Setup.
Figure 1: TiVo-Pace XG1 DVR
The TiVo-Pace XG1 is a DVR gateway hardware platform developed by Pace PLC. TiVo partnered
with Pace to provide the TiVo DVR software on the Pace XG1 platform. The TiVo-Pace XG1 DVR
runs standard TiVo set-top box software, beginning with TiVo client software release 2.24.
The TiVo-Pace XG1 DVR enables Operators to support new services and entertainment offerings by
creating a hardware platform that can run various software suites.
The TiVo-Pace XG1 DVR is a versatile whole-home hybrid QAM (Digital Cable)/IP device capable
of supporting local video decoding and multiple connected IP clients. Content sharing and home
networking are supported by Ethernet and MoCA 2.0 interfaces. The TiVo-Pace XG1 DVR also
supports dual transcode for external devices, as well as a removable hard disk drive for content
storage.
The TiVo-Pace XG1 DVR incorporates a 3000+ DMPS processor supported by 256 MB of Flash
memory and 1 GB of SDRAM. A CableCARD conditional access system provides for decryption of
up to six QAM streams. An additional two QAM demodulators are available to provide fast-channel
change to enhance the user experience.
