FITTING INSTRUCTIONS
Product:
T15 Signature Frontal Protection System
Vehicle:
Toyota HiLux (MY2020)
Part No.
070AP15N87J
For product warranty please refer to our website www.tjm.com.au
F-31649
Page 1 of 18
15/03/2021
Australian Standards Relating to Installing Vehicle Frontal Protection Systems (VFPS): AS 4876.1-2002
a)
Do not attach V.F.P.S. to vehicle using anchorages not intended for this purpose (e.g. engine mounting bolts), other than those
specified by the V.F.P.S. manufacturer in this instruction.
b)
Do not use this product for any vehicle make or model other than those specified by the V.F.P.S. manufacturer (as above).
c)
Do not remove any plaques or labels from the V.F.P.S.
d)
Do not modify the structure of the V.F.P.S. in any way.
•
Read instructions fully before commencing fitment.
•
Left hand & Right hand components are determined as seated in the vehicle.
•
Check for (and remove) any build up in all captive nuts fitted to the FPS.
•
Be aware that a number of government / fleet departments require that the
tow points be painted red.
•
Ensure that the
“Rated Recovery Point Label” is affixed alongside the
compliance label, in the driver’s side doorjamb.
Bolt tensions
Dia. (mm)
Nm
ft.lbs
Dia. (inch)
Nm
ft.lbs
All bolt tensions are
as follows unless
otherwise
specified.
5
5
4
1/4”
9
7
6
9
7
5/16”
22
15
8
22
16
3/8”
33
27
10
44
32
7/16”
55
43
12
77
57
1/2”
86
66
