FITTING INSTRUCTIONS
Product:
T15 Signature Frontal Protection System
Vehicle:
Toyota HiLux (MY2020)
Part No.
070AP15N87J
For product warranty please refer to our website www.tjm.com.au
F-31649
Page 13 of 18
15/03/2021
38.
Secure the hinged number plate to top holes
using hinge bush (2), M5 x 0.8 x 20mm pan
head screw (2), M5 x Ø10mm flat washers
(4) & M5 nyloc nut (2).
39.
Using a M6 x 1.0 x 16mm SS button head
bolt, M6 x Ø 12.5mm SS flat washers (2) &
M6 SS nyloc nut, secure the spring latch and
spacer to the FPS, as shown.
ALTERNATIVELY, USE R-CLIP (2) IN
LOWER HOLE FOR ABSOLUTE POSITION
LOCK OF THE HINGED NUMBER PLATE.
40.
Insert the nylon plugs supplied, into the
square cut-outs for the indicator/park lights.
41.
Separate the indicator / park light body from
the backing plate.
42.
Secure the backing plate to the FPS, using
the screws provided with the light
assemblies.
43.
Supporting the backing plate, re-fit (clip)
each indicator / park light body (ensuring
that an adequate seal is achieved).
Ensure that the park light is towards
the outside of the vehicle.
Repeat the previous four steps for the opposite
side of the vehicle.
HINGE BUSH
