12
9. SERVICE INSTRUCTIONS
Never service or lubricate the unit engine while running.
After servicing the unit, restore and fasten all guards, shields, and covers to their
original positions.
Never drain oil into the ground, into open streams, or down sewage drains.
Keep air filter clean at all times. Wash away dust and debris using anon-oil based
cleaning solvent. Let the filter dry before re- installing.
WHEN LIFTING/LOWERING ALWAYS:
1.
Set the machine in an upright position.
2.
Stop the engine or electric motor.
3.
Secure hardware on the machine.
4.
Make sure you use appropriated lifting equipment to lift equipment.
5.
Do not position yourself where you could possibly be pinched / caught between
the equipment and some other obstacle.
TOWING
1.
Do not tow the unit with another vehicle. The grinder may be damage if towed.
STORING
1.
Drain fuel tank.
2.
Run the engine until the fuel in the injection system is completely consumed.
3.
Clean drive shaft, threats. Coat parts with grease.
4.
Lube all bearings
5.
Empty water system
6.
Clean all moving parts with WD-40 lubricant.
7.
Lower unit completely.
8.
Cover unit for protection.
ENGINE
See engine owner´s manual maintenance schedule.
SPARK PLUG
1.
Check and clean spark plugs regularly. A fouled, dirty or carbonized spark plug
causes hard starting and poor engine performance. Set spark plug gap to
recommended clearance. Refer to engine manual.
Discount-Equipment.com
