4
www.tkequip.com
(956) 796 - 9411
ALWAYS HAVE READY:
1.
Dealer Account number
2.
Shipping address and method of shipping if different than billing address.
3.
Applicable model and serial number of machine(s). 3A9S#############
4.
Item part number(s), description, and quantities.
3. OPERATING INSTRUCTIONS
This Operation manual contains only standard parts. Variations of these parts as well as other
special accessories are not included. Contact your local distributor for assistance in identifying
parts not included in this manual.
ASSEMBLY INSTRUCTIONS
1.
Remove the machine and all components from its shipping crate. You will see:
•
Preassembled Rammer w/ wheel kit (if applies)
Note: All installation hardware must be inserted into its respective location
on the unit, reference parts breakdown for more details if needed.
Warning: failure to use proper lifting equipment could cause
equipment to fall and cause serious injury.
2.
If Rammer is shipped regular, using appropriated equipment, bring the unit to the ground
from its shipping pallet. Rammers can be lifted by hand by 2 or more people.
PRE-START-UP INSPECTION
1.
The following Pre-start-up inspection must be performed before the start of each work
session or after every four hours of use, whichever is first. If any fault is discovered, the
rammer must not be used until the fault is rectified.
2.
Thoroughly inspect the rammer for signs of damage. Check components are present
and secure. Pay special attention to the belt drive safety guard fitted between the
engine and the vibrator unit.
3.
Check the engine oil level and top up as necessary.
4.
Check the engine fuel level and top up as necessary.
4. SAFETY PRECAUTIONS
READ AND STUDY THE FOLLOWING SAFETY INFORMATION BEFORE ATTEMPTING TO OPERATE THIS
EQUIPMENT. IN ADDITION, ENSURE THAT EVERY INDIVIDUAL WHO OPERATES OR WORKS WITH THIS
EQUIPMENT IS FAMILIAR WITH THESE SAFETY PRECAUTIONS.
