9
www.tkequip.com
(956) 796 - 9411
8. ADDING FLUIDS & TRANSPORTATION
STOP THE ENGINE BEFORE:
1.
Adding fuel/Oil.
2.
Leaving equipment unattended for any amount of time.
3.
Making any repairs or adjustments to the unit.
4.
Transportation.
IF LIFTING/LOWERING EQUIPMENT ALWAYS:
1.
Stop the engine.
2.
Remove wheel kits (If applies)
3.
Secure any other hardware on the unit.
4.
Make sure you use appropriated lifting equipment rated to lift the unit.
Have in mind the equipment weight.
5.
Do not position yourself where you could possibly be pinched / caught between
unit and some other obstacle.
TRANSPORTATION
1.
Move Unit on the jobsite by hand pushing unit using the optional wheel kit
(Trolley). Wheel kit is used for short distance transportation.
2.
If not using a wheel kit, use lifting point when lifting machine. Make sure lifting
device has enough capacity to hold machine weight.
3.
Do not push rammer in ground or damage can occur.
4.
Do not fuel while mounted on truck bed
STORING
1.
Drain fuel tank.
2.
Clean shaft and bearings. Coat parts with grease.
3.
Lube all bearings
4.
Inspect the rubber anti vibration mounts for wear or deterioration
5.
Empty water system to avoid corrosion, inspect the water hose and its
connections to ensure that they do not leak.
6.
Clean all moving parts with WD-40 lubricant.
7.
Clean the underside of the rammer regularly to prevent a buildup of material.
8.
Cover unit for weather protection.
