Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be
added to an existing wireless network
to communicate
with the devices of this network. This process is called
Inclusion
.
Devices can also be removed from a network. This process is called
Exclusion
. Both processes are initiated by the primary controller of the Z-Wave
network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right
on the device.
Inclusion
Press the socket on/off button three times within 1.5 seconds to be included.
Exclusion
Press the socket on/off button three times within 1.5 seconds to be excluded.
Product Usage
LED Indication
To distinguish what mode he switch is in, view from the LED for identification
Create PDF in your applications with the Pdfcrowd
HTML to PDF API
PDFCROWD
