2 Safety Instructions
2.1 Safety
This section contains general safety instructions for using your TKH Airport Solutions equipment. Some
safety instructions may not apply to the equipment in this manual. Note all warnings and follow all
instructions carefully. Failure to do so may result in personal injury, death, or property damage.
To use this equipment safely,
•
Refer to the International Standard IEC 61820, Electrical installation for lighting and beaconing of
aerodromes - Constant current series circuits for aeronautical ground lighting - System design and
installation requirements, and to the International Standard IEC 61821, Electrical installations for lighting
and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series
circuits for instructions on safety precautions.
•
Observe all safety regulations. To avoid injuries, always remove power prior to making any wire
connections and touching any live part. Refer to the International Standards IEC 61820 & IEC 61821.
•
Read and become familiar with the general safety instructions provided in this section of the manual
before installing, operating, maintaining, or repairing this equipment.
•
Read and carefully follow the instructions given throughout this manual for performing specific tasks and
working with specific equipment.
•
Store this manual within easy reach of personnel installing, operating, maintaining, or repairing this
equipment.
•
Follow all applicable safety procedures required by your company, industry standards, and government or
other regulatory agencies.
2.2 Qualified Personnel
The term "qualified personnel" is defined here as an individual who thoroughly understands the equipment
and its safe installation, operation, maintenance, and repair. Qualified personnel are physically capable of
performing the required tasks, familiar with all relevant safety rules and regulations, and have been trained
to safely install, operate, maintain, and repair the equipment. It is the responsibility of the company installing,
operating or maintaining this equipment to ensure that its personnel meet these requirements.
2.3 Intended use
Use of this equipment in ways other than described in the datasheet and this manual may result in personal
injury, death, or property damage. TKH Airport Solutions cannot be held responsible for injuries or damage
resulting from non-standard, unintended application of its equipment. This equipment is designed and
intended only for the purpose described in this manual. Uses not described in this manual are considered
unintended use. Unintended use may result from taking the following actions:
•
making changes to equipment that have not been recommended or described in this manual or using
parts that are not genuine TKH Airport Solutions replacement parts or accessories
•
using materials or auxiliary equipment that are inappropriate or incompatible with your TKH Airport
Solutions equipment
•
allowing unqualified personnel to perform any task
6
Installation and Maintenance Instructions - LED AGL Runway Guard Lights - type 921
©
TKH Airport Solutions 2022. All rights reserved.
