User Manual - Network Dome Camera –
&ϭϬϬϭsϭͲ/ͬd
6
Ɣ
Please make sure that the plug is firmly connected to the power
socket. When the product is mounted on wall or ceiling, the
device shall be firmly fixed.
Ɣ
If smoke, odor or noise rise from the device, turn off the power
at once and unplug the power cable, and then please contact
the service center.
Ɣ
Proper configuration of all passwords and other security
settings is the responsibility of the installer and/or end-user.
Cautions
Ɣ
Make sure the power supply voltage is correct before using the
camera.
Ɣ
Do not drop the camera or subject it to physical shock.
Ɣ
Do not touch sensor modules with fingers. If cleaning is
necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
please replace the lens cap to protect the sensor from dirt.
Ɣ
Do not aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is not a
malfunction), and affect the endurance of sensor at the same
time.
Ɣ
The sensor may be burned out by a laser beam, so when any
laser equipment is in using, make sure that the surface of
sensor will not be exposed to the laser beam.
Ɣ
Do not place the camera in extremely hot, cold (the operating
temperature shall be-30°C ~+60°C, or -40°C ~ +60°C if the
