Our Brands:
FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
Meridiaan 32
2801 DA, Gouda
The Netherlands
PD900/PD910/PD920
January 4, 2021
Installation ManualPD900/PD910/PD920
Page 12
2.4 Connectors
PD900 connectors
Nr
Connector
Definition
1
Power Connector (12 VDC)
12 VDC power connection (selected models)
2
Console Connector
This connector is used by manufacturer for support
and diagnostics.
3
RJ-45 Port
For network communications and optional UPoE
power supply. Contact TKH Security for a
compatible UPoE injector.
4
Power (24 VAC)
24 VAC power connection
5
BNC
Analog video output
6
Audio/Alarm I/O & RS-485
Audio/Alarm I/O and RS-485 connection
Do
not
connect external power to the alarm I/O
connector of the camera.
7
Reset button
Press the button with a proper tool for at least 20
seconds to restore the system.
8
SD card slot
Insert the SD card into the card slot to store videos
and snapshots. Do not remove the SD card when
the camera is powered on.
Note
: It is not recommended to continuously (24/7) record with the micro SD card, as the
camera may not support long-term continuous data read/write. Contact the manufacturer of
the micro SD card for information about the card’s reliability and life expectancy.