13
STEP 5
a.
Connect the Extension Wire (124) in the Upright post to the Lower Connection Wire (125)
in the Main Frame.
b.
Connect the Pulse Sensor Wire in the Upright Post (128) to the Pulse Sensor Wire in the
Main Frame (129)
c.
Make sure the plugs and the sockets are connected and locked securely.
d.
Install the Front Decorative Cover (21) onto the front of the Main Frame (1) using 2
Screws, Round Head (M5xp0.8x50mm) (96.)
e.
Attach the TAG Logo to the center of the Front Decorative Cover (21)
f.
Roll down the Upright Sleeve (22) to cover the gap between the Upright Post and the Main
Frame.
Summary of Contents for 9GR
Page 1: ...ASSEMBLY MANUAL 9GR RECUMBENT CYCLE...
Page 2: ......
Page 4: ...3...
Page 7: ...6 EXPLODED DIAGRAM A...
