13
、
Do not block fan intake or exhaust ports. Do not operate
equipment on a surface or in an
Environment which may impede the normal flow of air around
the unit,such as a bed,rug.
Weathersheet,carpet,or completely enclosed rack.. If the unit is
used in an extremely dusty or smoky envronment,the unit
should be periodically “blown free” of foerign matter.
14
、
Do not remove the cover.Removing the cover will expose
you to potentially dangerous voltages.There are no user
serviceable parts inside.
15
、
Do not drive the inputs with a signal level greater than that
required to drive equipment to full output.
16
、
Do not connect the inputs/outputs of amplifiers or consoles
to any other voltage source,such as a battery,mains source,or
power supply,regardless of whether the amplifier or console is
turned on or off.
17
、
Do not run the output of any amplifier channel back into
another channel’s input.Do not parallel-or series-connect an
amplifier output with any other amplifier output.Australian
Monitor Inc is not responsible for damage to loudspeakers for
any reason.
18
、
Do not ground any red (“hot”) terminal. Never connect a
“hot” (red) output to ground or to another “hor” (red) output!
19
、
Non-use periods .The power cord of equipment should be
unplugged from the outlet when left unused for a long period of
time.
20
、
Service Information Equipment should be serviced by
qualified service personnel when:
A
、
The power supply cord or the plug has been damage.
B
、
Objects have fallen,or liquid has been spilled into the
equipment
C
、
The equipment has been exposed to rain.
D
、
The equipment does not appear to operate normally,or
