4
State-of-the-art
This tool is state-of-the-art technology.
To ensure that the equipment operates
safely, it must be operated in a proper and
safety-conscious manner.
Technical changes
In the interests of quality assurance, we
reserve the unrestricted right to carry out
technical changes as a result of further
technological developments and product
improvements without prior notification.
Reading the owner’s manual
Before using the tool, make
sure you read the owner’s man-
ual carefully and understand
it. This manual must always be
available where the product is
used.
Handling
All the actions necessary to ensure correct
operation are described in the owner’s
manual. Any working methods other than
those approved by the manufacturer are
prohibited.
Faults
If faults occur, the operator may only
eliminate those faults through their own
actions where the corresponding remedy
is described.
Warranty
The manufacturer accepts no liability for
damage or injury caused by improper re-
pair or the use of third-party replacement
parts.
No warranty will be provided for damage
caused to the device due to the tool being
used incorrectly.
Environment
Make sure that the tool is set up in a work
area which is free from sources of corrosive
liquids, greases or oils.
Declaration of Conformity
The tool has been manufac-
tured in accordance with inter-
national guidelines. The rele-
vant declaration of conformity
(CE, UKCA, CB) is included with
this owner’s manual.
1.1
General instructions
5.5
Summary of Contents for 81 29 2 208 034
Page 2: ...2...
